Build Your Own FreeBSD Motorcycle
from bike.owns.com via Slashdot

It runs UNIX!

I removed the charcoal can, and cut out most of the plastic casing to install a Shuttle SV24 Flex-ATX motherboard in the tail section. I cut off the rest of the case except for the bare minimum required to bolt in a PCI card on the riser, and all 4 motherboard mounting screws.
I've upgraded the CPU to a P3 Coppermine 1Ghz and added 256MB of RAM. Beneath the 'case', or whats left of it anyway is a 40GB Seagate hard drive.

I mirrored one of the videos, as that site is subject to the /. effect, but go to the site if it's still up.

posted by prof_booty | 11:52 PM